Home Arts & Crafts Sewing Machine Repair Tutorial & Trainings

Sewing Machine Repair Tutorial & Trainings

37
0
Sewing Machine repair tutorial Training

Are you bored at home and want to do some crafting but your sewing machine is not in a state to be used and you are too reluctant to take it to a repair shop? Well, if you meet all these requirements then this article is what you need to read from start till end. It is because here we are going to show you how to repair some common sewing machine glitches on your own and that too in a few minutes. Many people while using a sewing machine face different kinds of problems. Since they don’t know anything about the problem or how to fix it, they either are forced to take it to a repairing shop or leave it in the dust.

But if they have the right skills to not only spot the problem but fix it as well, then there won’t be anything stopping them from being creative and sew anything they like. So, below we have mentioned some of the common sewing machine Repair tutorial to fix them.

saveSewing 101 Building a Strong Sewing Foundation

      • Margarete Smith via Udemy
      • 6,885+ students enrolled!
      • ★★★★☆ (633 Ratings)

Sewing Machine Repair Tutorial

There Might be a Problem in the Thread

If you feel like your thread is bunching up or your stitching seems unusual then there are chances of something wrong or too tight. As you all know that a standard sewing machine uses two threads. One thread is used to unwind from a spool on top of the machine which goes through the needle. And the other is the one that comes from a tiny spool underneath. So when the machine is adjusted in the right way, the two threads would wrap around each other in order to create a stitch.

And if for some reason, one of the threads is tighter than the other, your resulting stitch would pull out of whack. And this would roughen the texture of your fabric. Thus you need to check both threads and make sure that they both are either not too lose or too tight to prevent your fabric or cloth getting rough. You might also be interested in Best Free Online Sewing Courses.

Check Whether your Needle is Straight

To be able to sew something perfectly, you need to make sure that the needle is not only sharp but straight and installed correctly as well. You should check that it’s not bent and even if it is working smoothly, it is best to replace it with a new one after some time. Similarly, different fabrics require different needles and it is your job to know and make sure that you are using just the right needle. Also the machine needles come in different sizes. Some are quite sharp while others are ball point. The main problem here is that all needles look similar to one another. And to avoid confusion, you should check the package and read the instructions.

Another shorter way to find out the right needle is that, if your machine keeps skipping stitches, then there is a very good chance that you are using the wrong needle.

There Might be an Issue in the Settings

While using a sewing machine, there comes a point where your machine won’t sew at all. If this happens to you, then you might have forgotten to flip a switch somewhere. So first you should check whether it is turned on? The check if the pedal is connected on not. Or is the presser foot down. Similarly, if your machine is humming and whirring but the needle is not moving, then the bobber winder must be turned one. Bobber winder is a feature that lets the machine’s motor wind a bobbin for you.

Another issue that you can face is if the needle is moving but the fabric doesn’t then you need to check the feed dogs. Feed dogs are the spiky bars underneath.

If the needle moves but the fabric doesn’t, check the feed dogs. These are the spiky bars underneath the needle that move to slide the fabric along as you sew it. There’s a switch that turns them off; you may have hit it accidentally, so just turn it back on. You can also check out free online Quilting Classes.

Cleaning the Darn thing will increase the Efficiency of your Machine

Among so many things that we have just mentioned, another thing that you should check is whether your machine is clean or not. If the machine is acting a little weird then it is best to clean it carefully. You can first open up the bobbin case because it is easily accessible and brush it out carefully. Then try to open any other area which you seem is accessible and brush out the lint and apply a few drops of machine oil or as per the instructions given in the manual.

saveSewing 101 – The Basics

      • Valeria Garala via Skillshare
      • 1,283+ students enrolled!
      • 3 Projects included
      • ★★★★☆ (46 Ratings)

saveSewing 101 Building a Strong Sewing Foundation

      • Margarete Smith via Udemy
      • 6,885+ students enrolled!
      • ★★★★☆ (633 Ratings)

Final Thoughts

So, above were some of the ways that can help you repair your sewing machine without having to take it to a repairing shop. Note that, all these repairing instructions that we have mentioned can help in handling a misbehaving machine. But if all these ways fail, then you either need to call up a machine repair shop and get it fixed by them or get a professional sewing machine training and become an expert in repairing all types of problems. Thus in the end we would say that all these ways are sufficient to repair minor or most common problems in your sewing machine. So, read this sewing repair tutorial carefully and learn some cools ways to repair most common issues in your sewing machine. And don’t forget to stay safe, stay home, and never stop learning.

LEAVE A REPLY

Please enter your comment!
Please enter your name here